ধীর ইন্টারনেট ও মান
মেশ মানে কী, অংশগ্রহণকারীর যুক্তিসঙ্গত সীমা, কোয়ালিটি টিয়ার, ডেটা সেভার ও শুধু অডিও, ইউজার-হোস্ট-মালিক কী করতে পারেন, আর কানেকশন মিটার।
Video calls are heavy. This chapter explains how AIOMeeting tries to keep a call usable on weak networks, and what you can do when it is not enough.
1. What mesh means
In a mesh, each browser has a separate connection to every other browser. In a room of N people, each browser sends its video N-1 times and receives N-1 streams.
| People on video | Streams one browser sends | Streams it receives |
|---|---|---|
| 2 | 1 | 1 |
| 4 | 3 | 3 |
| 8 | 7 | 7 |
| 12 | 11 | 11 |
| 16 | 15 | 15 |
The upload of the sender is the usual limit. A home line with 5 Mbps upload cannot send 15 HD streams. So the numbers matter more than the server.
2. Sensible participant caps
| Situation | Suggested limit |
|---|---|
| Everyone on video, mixed networks | 8 to 12 |
| Everyone on video, good office networks | 12 to 16 |
| Most people audio only | 30 to 50 |
| Webinar: a few panelists, many viewers | 4 to 8 panelists, hundreds of viewers |
Set the site-wide cap in Settings, Meetings ("Site-wide cap on participants per meeting") and the package limits under Finance, Packages. You can sell large rooms, but tell customers that big rooms work best as audio only or webinars. A 300-person Business package is meant for webinars and audio-led meetings.
3. Quality tiers
The browser measures packet loss and round-trip time every 3 seconds and adjusts.
| Tier | Video | Bitrate cap |
|---|---|---|
| HD | 1280x720 at 24 frames/s | 1.2 Mbps |
| SD | 640x360 at 20 frames/s | 500 kbps |
| Low | 320x180 at 12 frames/s | 150 kbps |
| Audio only | none | audio only (24 to 32 kbps by default) |
With Automatic quality on, the tier also drops as the room grows: from the "SD from" number of people (5 by default) it uses SD, and from the "low from" number (10 by default) it uses Low. A message "Your connection is weak. Switching to a lower video quality." appears when the browser steps down.
Receivers also ask senders for a lower layer when they show many small tiles.
4. What users can do
Everyone has three controls in More and Audio and video settings.
- Video quality. Choose Automatic, or force HD, SD, Low or Audio only for what you send.
- Data saver. Smaller video and fewer tiles. Also offered on the preview screen as "Data saver (slow internet)".
- Turn off the camera. Audio alone is the cheapest call.
The Connection panel in More, Meeting info shows your sending tier, the number of people, the mode, packet loss and the signal.
Advice for a person on a bad network:
- Join with the camera off and turn it on only when you speak.
- Use Data saver.
- Move closer to the router, or use a cable.
- Close other tabs and downloads.
- On mobile data, keep the phone still and the screen on.
5. What the host can do
- Use Stop their video on a person whose link is weak, or ask people to switch their cameras off.
- Use Spotlight, so everyone sees one speaker large and the rest as small tiles.
- Switch to a webinar so attendees only receive.
- Lower the Highest quality tier in the Meetings settings.
- Keep rooms to the sensible caps above.
6. What the site owner can do
- Put a TURN server in place. Calls that fall back to relays survive firewalls, but a relay uses your bandwidth. See Meeting settings.
- Leave Long polling off on shared hosting.
- Keep PHP on a recent version with OPcache on, so the signalling endpoint answers fast.
- Use a CDN or Cloudflare for the static files of the site. Do not put the
rtc.phpendpoint behind page caching.
7. The connection meter
Each person's connection gets a rating from 1 to 5, shown as dots beside the name in the host's People panel and saved in the session report. A host can see who is struggling and ask them to turn off video.
8. Recording and quality
Recording adds a little load to the recorder's computer. If the recorder's machine is weak, the picture may stutter. For important sessions, record on a computer with a wired network and close other programs.